Low temperature foaming agent
Brand JUN HUI
Product origin HuBei
Low temperature foaming agent
Widely used for foaming EVA, PE, PVC, natural rubber, synthetic rubber, PVC+NBR blends, etc., especially suitable for large mold hot pressing foaming and small mold hot pressing foaming of sub EVAMD.
Low temperature foaming agent
Product Introduction
special
conscript
Good whiteness of the product
Low decomposition temperature, stable foaming ratio
Good elasticity of the product
Application Instructions
Low temperature foaming agents have a low decomposition temperature and do not require the addition of any active agents to activate their decomposition. Reduction of foaming agents
It can not only reduce costs, but also avoid causing discoloration, making it the most suitable for producing pure white foam products. When producing colored products, a large amount of pigment can also be saved, which can make the color of the products more bright, bright, and realistic. Low temperature foaming agents can provide good pore structure for products, and their outstanding feature is the ability to produce whiter EVA high-end shoe materials without affecting other physical properties. It is recommended to use this foaming agent at a lower mixing temperature and under normal vulcanization conditions to avoid premature foaming, which may cause defects such as uneven and coarse pores in the product. The use of low-temperature foaming agent is beneficial for the stretching and tearing of the product, especially for improving the elongation of the product.
Low temperature AC-L is a new environmentally friendly low-temperature foaming agent, and its decomposition products do not contain formaldehyde.
technical indicators
| Parameter | Low Temperature Blowing Agent | Eco-friendly Low Temperature Blowing Agent |
|---|---|---|
| Brand | ACP-H | AC-L |
| Chemical Composition | Azodicarbonamide | Azodicarbonamide Composite |
| Appearance | Light yellow easily dispersible powder | Light yellow easily dispersible powder |
| Decomposition Temperature, ℃ | 130 ± 5 | 152 ± 5 |
| Gas Evolution ml/g STP | 140 ± 5 | 160 ± 5 |
| Average Particle Size (μm) | 7-10 | 6-8 |
| Moisture, % | ≤0.3 | ≤0.3 |
| Ash Content, % | ≤0.3 | ≤0.3 |
Packaging and expiration date
Each piece has a net weight of 25KG and is packaged in kraft paper bags, cardboard boxes, or paper drums.
A batch number of 2 tons, this product has a shelf life of 6 months.
save store
It does not decompose at room temperature, but must be stored in a cool, dry, and well ventilated place. Keep away from hot steam pipes and sources of ignition, and avoid direct exposure to sunlight. It is strictly prohibited to come into direct contact with acid or alkali. ACP-H foaming agent is prone to moisture absorption, please pay attention to moisture prevention. After opening, the product must be sealed in the bag in Bo Ci when not in use,
Avoiding moisture may affect the effectiveness of use.
operating procedures
It is recommended to have good ventilation conditions in the operating area to avoid inhaling dust, deep skin contact, and swallowing. When using the same batch of foaming agent, customers only need to test one hand of the small material first to confirm that it is correct, and can use the entire batch of foaming agent with confidence.
